POWER SUPPLIES

The power supply can be a single output power supply if the TEC is running at 12 to 20 vdc. With two power supplies, or a dual output power supply, you can provide 2 to 20 vdc for the TEC and 12 to 20 vdc for the temperature controller's circuit. Note: The circuit's vdc must be equal to or greater than the vdc for the load.

DIMENSIONS

(includes bracket)

Inches: 6 long x 3.625 wide x 1.75 high

Centimeters: 15.3 long x 9.2 wide x 4.5 high

CONNECTORS

For input and output power: Fast-on connectors.

The connector to the controller for the communications is:

10 Pin Connector
P/N 102398-3 AMP
COVER EJECT 102537-3 AMP
CONN. BACK 102536-3 AMP

The connector to the controller for each sensor is:

P/N 22-01-2027 MOLEX
PINS P/N 08-50-0114 MOLEX

ACCESSORIES

The Communications Cable (MODEL 0145) and Sensor Connectors (MODEL 0144) for this controller are available as accessories. See the prices back on the specifications page.